Sensorsoft ST6105J Instrukcja Użytkownika Pobierz pdf (Strona 39)

Sensorsoft Remote Watchman Express/Client User Manual

12. Save your settings by clicking the Apply button.

13. Click the Send Test Message button to start the test page.

Using the DTMF Method

1. Click on Menu – Settings – Pager Alerts.

2. Select an Alerting Interval between 1 and 150 minutes using the up and down buttons. This

alerting interval applies for all pager events, excluding scheduled and return to normal events,

for the SSD you are monitoring.

3. Ensure that you have a supported modem installed or connected on your computer and that

you know its COM port number.

4. From the Modem Port drop down list select the COM port where your modem is installed.

5. Select the modem you are using from the Modem Type drop down list.

6. Select the Lock Modem Port checkbox if this is the only SSD you are monitoring. This will

improve reliability and prevent other applications on your computer from using the modem.

7. From the Events frame select an event you wish to configure and test.

8. Select DTMF (Numeric Only) from the Paging Type drop down list.

9. Type your pager phone number into the field labeled Pager Phone Number.

10. In the DTMF Only frame specify the amount of time that software should wait for the voice

announcement to complete before issuing the DTMF message tones. It may require several

test message attempts to determine the optimal time.

11. By default, the Message field should already have a sample message. Please ensure that the

message is numeric only and contains no alphabetic letters.

12. Save your settings by clicking the Apply button.

13. Click the Send Test Message button to start the test page.

IMPORTANT TIP:

We recommend that you test your paging setup for each type of event and after each change in

the settings. When the test is complete, a dialog box appears indicating the success or failure of

the message transmission. If the transmission fails, check your settings and try the test again.

1 2 ... 34 35 36 37 38 39 40 41 42

Brak uwag

Sensorsoft ST6105J Instrukcja Użytkownika Strona 39